D651WEY

A place to showcase your pride and joy

Moderators: eastlmark, BIG_MVS, Test Moderator

User avatar
User

mogster242

Rank

Non Member

Posts

556

Joined

Mon Apr 19, 2010 9:13 pm

Location

Bournemouth


Has thanked: 20 times
Been thanked: 6 times

D651WEY

Postby mogster242 » Wed Oct 10, 2012 10:33 pm

I have owned my GTA Turbo for almost 2 years now so I thought it would be a good time to start a project thread.

You may remember last year’s visit to RATS for a rear suspension turrets replacement and rear subframe + running gear refurbishing job.

http://www.renaultalpineownersclub.com/phpBB2/viewtopic.php?t=5189&postdays=0&postorder=asc&start=30

One big mistake, the white paint… it didn’t stay white for long and one year on it look rubbish :evil: . We learn from our mistakes, so it should be black fairly soon

The engine out job disturbed a lot of electric connections etc so I spent the next few months chasing electrical gremlins. There was a lot of this

Image

Image

Image


So I rewired the injector loom and other bits which got rid of a lot of issues.


Image


I had a relatively trouble free first half of 2012 with a quick visit at RATS for a clutch change.

I managed to compete at few hillclimbs events (Gurston Down, Prescott & Abingdon) which was great.


Image

Image


Then I discovered that the turbo was leaking oil in the air inlet and needed refurbishing :roll: :?
I saw this as an opportunity to upgrade and was speaking with a local company.

Just before doing the work I decided to put the GTA on the rolling road to have an idea of where I was, for reference.


Image

Image


So here we go 170bhp and 189lb.ft which I guess is reasonable for a 26 years old car with 179000 miles on the clock.

At that point I started enquiring about rebuilding the engine to catch back those lost horses… instead I bought a spare engine :lol:


Image


This was a godsend as a month later the bottom end of my engine went while having fun on the lovely Dorset roads :evil:

The car is now off the road and the plan is to swap the engine over the winter, with a few upgrades :twisted: details to follow…….
Last edited by mogster242 on Fri Oct 12, 2012 7:55 pm, edited 1 time in total.
1989 GTA V6 Turbo Grey
Megane R26 F1
Clio 197
User avatar
User

PaulyA610

Rank

Non Member

Posts

902

Joined

Sat Nov 14, 2009 9:30 pm

Location

Gloucester


Has thanked: 1 time
Been thanked: 3 times

Postby PaulyA610 » Thu Oct 11, 2012 7:54 am

Let the modding commence!!!!
Lotus Evora 400
Renault R8
Renault Megane R.S 265 Trophy
Renault megane sport tourer



GAZ Suspension Dealer,SPAX Dealer, Forge Motorsport Dealer,Alpine ICE Dealer,
User avatar
User

BIG_MVS

Rank

Club Member

Club Member
Posts

5097

Joined

Wed Jun 30, 2004 9:12 am

Location

Sandbach


Has thanked: 38 times
Been thanked: 72 times

Postby BIG_MVS » Thu Oct 11, 2012 12:20 pm

Keep up the good work Mogster!

I guess it's done pretty well to last 2 years track abuse with that mileage.
1994 A610 - Montana Red (For Sale)
no avatar
User

Alpineandy

Rank

Club Member

Club Member
Posts

2381

Joined

Mon Jun 14, 2004 8:37 am

Location

North Essex


Has thanked: 5 times
Been thanked: 10 times

Re: D651WEY

Postby Alpineandy » Thu Oct 11, 2012 1:27 pm

mogster242 wrote:One big mistake, the white paint… it didn’t stay white for long and one year on it look rubbish :evil: . We learn from our mistakes, so it should be black fairly soon


There is a benefit to having light colours as it's much easier to keep a check on any future rust or damage, whereas with black something can be beyond repair before you notice it.

You could consider a different colour (silver?) instead of black... even though Black does seem to look the best :lol:
Alpine A110, Renault Safrane 2.5dt, Hudson Kindred Spirit (Renault powered), transAlp (Honda) and Ducati Multistrada
User avatar
User

mogster242

Rank

Non Member

Posts

556

Joined

Mon Apr 19, 2010 9:13 pm

Location

Bournemouth


Has thanked: 20 times
Been thanked: 6 times

Postby mogster242 » Thu Oct 11, 2012 10:45 pm

everytime it rains hard i find water in the footwell and in the fuse and relay box under the steering wheel :shock: i have changed the door seals but it still happens. i really dont know where the water is coming in from. could it come from the windscreen seal?

with therecent heavy rain i found loads of water in the footwell, the carpet was soaking wet so i removed it and found this

Image

Image

this is only on the driver side... is this structural? it stops at the raised crossmember under the seat which does not look damaged. how do i get about repairing this?

i'm very worried about this, i am now planning to remove all the carpets to check everywhere inside the car. any tips on removing the carpet? there seems to be a strong yellow glue which makes it difficult to remove...



also found rust on the floor behind the pedal cover. look fine from underneath though.

Image



and the handbrake bracket, but thats only surface rust so not not too worried about this.

Image
1989 GTA V6 Turbo Grey
Megane R26 F1
Clio 197
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Postby clee » Fri Oct 12, 2012 7:29 am

User avatar
User

BIG_MVS

Rank

Club Member

Club Member
Posts

5097

Joined

Wed Jun 30, 2004 9:12 am

Location

Sandbach


Has thanked: 38 times
Been thanked: 72 times

Postby BIG_MVS » Fri Oct 12, 2012 8:12 am

Crikey, bet your heart sunk when you peeled back that carpet :shock:

All repairable I guess, looks like another trip to Derbyshire then?
1994 A610 - Montana Red (For Sale)
User avatar
User

Miles

Rank

Non Member

Posts

725

Joined

Thu Apr 14, 2005 9:06 am

Location

Hampshire


Has thanked: 35 times
Been thanked: 10 times

Leak

Postby Miles » Fri Oct 12, 2012 4:24 pm

Will be windscreen more than likely. Sit in side and get her indoors aka your wife to spray a hose around windscreen then door window and door mirror. It could also be damage to the plastic layer inside the door which should stop water entering inside once it has entered between window and door.
User avatar
User

mogster242

Rank

Non Member

Posts

556

Joined

Mon Apr 19, 2010 9:13 pm

Location

Bournemouth


Has thanked: 20 times
Been thanked: 6 times

Postby mogster242 » Fri Oct 12, 2012 8:21 pm

BIG_MVS wrote:Crikey, bet your heart sunk when you peeled back that carpet :shock:

All repairable I guess, looks like another trip to Derbyshire then?


indeed it sank!!! :evil: this kind of discovery is very disheartening + really scared to see the extend of the damage + how much that's going to cost to make good:cry:

Clee, the pictures you posted, did you cut the fiberglass to look inside or does it come off somehow?

Miles, thanks for the advice, i will try that and hopefully will see where it comes from...
1989 GTA V6 Turbo Grey
Megane R26 F1
Clio 197
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Postby clee » Fri Oct 12, 2012 8:48 pm

You have to cut to get at it .
The pics show one we did a few months ago .It had had some repairs from the inside at some point but not very successfully ....
Main safety issue is seat belt anchors .
User avatar
User

Tony Smith

Rank

Non Member

Posts

1407

Joined

Fri Apr 16, 2004 4:50 pm

Location

Kent


Has thanked: 0 time
Been thanked: 19 times

Postby Tony Smith » Sun Oct 14, 2012 6:59 am

Mine was similar, long time water leak into footwell, carpet never drys out and it goes all manky. Car was outside and not being used so I never realised it was like it. 2 years later horrible mess. Water will be coming from one of 3 places. Screen top corner, door seal - most common - especially if hinges iffy or under bonnet area if not sealed correctly at top edge - this more likely if parked at a slightly uphill angle.
Alpines - GTA 3.0 Turbo, GTA 3.0 Inj (Project DD), GTA 6.2 V8 (500 bhp) , R32 Skyline GTR, BMW Alpina B10 635 Highline, Alpina B10 E39 5 Series, Jaguar 4.2 XKR, Laguna 205GT, BMW 120d.
no avatar
User

MFaulks

Rank

Non Member

Posts

1552

Joined

Sun Sep 28, 2008 4:25 pm


Has thanked: 45 times
Been thanked: 26 times

Postby MFaulks » Sat Dec 01, 2012 10:43 pm

.
How are you getting on with it Cedric? Have you had a good poke around to see how solid or not it is? It's essentially a side impact bar that serves the belt pickups as CLee says and convenient electrical bonding, as the structural integrity is only maintained when the metal side panel is fully bonded to the fibre glass structure forming a box section.

Anyway, hopefully to make you feel a bit better, in turbo world progress is being made:

Turbonetics S series T04E compressor being re-trimmed to meet flow expectations and Cedric’s target use. Back plate will be machined to match next.

Image

Quick comparison of old and new with up-rated turbine to match:

Image
... A diamond is only a piece of coal that did well under pressure... PRV afflicted, may be I need to squeeze harder!!!!

https://www.facebook.com/maftecfaulks
User avatar
User

mogster242

Rank

Non Member

Posts

556

Joined

Mon Apr 19, 2010 9:13 pm

Location

Bournemouth


Has thanked: 20 times
Been thanked: 6 times

Postby mogster242 » Sun Dec 02, 2012 11:02 pm

:D :D looking good yeah!

i have been fairly busy in the last few weeks finishing off my lean-to and my drive... so i have not touched the car which was parked in the street to allow for the drive work.

the lean-to is now finished and the replacement engine has moved in (just in time before the wife filed it up with random unnecessary stuff...). This is where i will be working during the winter :D not very spacious but at least dry and warm.

Image

the drive is also finished which means that the gta can move back on it tomorrow (which is a good thing as i found some muddy footprints on the bonnet and roof this morning... :evil: :evil: how they manage not to dent anything i dont know but as you can imagine i was pretty fecked off) and make loads of oil patches on the brand new tarmac...

Image

i will be able to get it ready for taking the engine out at some point when the rain stops...

in the meantime i have started taking bits off the new engine to give it a good clean etc
1989 GTA V6 Turbo Grey
Megane R26 F1
Clio 197
User avatar
User

mogster242

Rank

Non Member

Posts

556

Joined

Mon Apr 19, 2010 9:13 pm

Location

Bournemouth


Has thanked: 20 times
Been thanked: 6 times

Postby mogster242 » Sun Dec 02, 2012 11:03 pm

i need an engine glass cover latch spring as shown on the picture below... anybody got a spare one??

Image

many thanks
1989 GTA V6 Turbo Grey
Megane R26 F1
Clio 197
User avatar
User

mogster242

Rank

Non Member

Posts

556

Joined

Mon Apr 19, 2010 9:13 pm

Location

Bournemouth


Has thanked: 20 times
Been thanked: 6 times

Postby mogster242 » Tue Dec 11, 2012 11:59 pm

Right, car back on the drive, started disconnecting few bits, draining coolant etc... in preparation for the engine out operation...

took the turbo out of old engine to send to Mr Faulks, most of it was fairly straight forward and came off ok as Clee and i removed it earlier this year when replacing the clutch. however, the rear screw for the oil return pipe on the bottom of the turbo is an absolute ball ache to remove.... :evil: :evil: :evil: took me an hour to get that one out!!!

while i was in the car i took five minutes to remove some more carpets...

passenger footwell

Image

that brown foam is absolutely soaked... how do i take it out? how far back does it go? what is its purpose? i guess i need to remove the centre console? how do i go about it?

Image

water coming out of heater matrix?

Image

fuse box soaked again....

Image

dried it all as much as possible and the car is back under the cover so hopefully will stay dry until i have some time to solve this...

back in the lean-to i have also started taking bits off to clean etc...

Image

Image

Image

Image

Every bit carefully bagged and labelled so i know how it goes back together... :roll:
1989 GTA V6 Turbo Grey
Megane R26 F1
Clio 197
Next


  • Advertisement

Who is online

Users browsing this forum: No registered users and 21 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France